====================================================

06.05.2009
BIOS - Change V6.00 Release R1.13.2703.S1

- Available flash space for boot logo increased

- Bug Fix: Display stays dark after resume from ACPI S3 via USB device(s)

- Long delay for USB usage after resume from ACPI S3 fixed 


====================================================

27.03.2009
BIOS - Change V6.00 Release R1.12.2703.S1

- Bug Fix: LAN Remote boot was always active even if it had been disabled in BIOS Setup

- Added workaround for BIOS POST freeze with specific IDE optical drives

- Added "BIOS POST Textmode"-option for small LVDS displays
  Note: In graphics mode (= BIOS Setup default; 800 x 600 resolution) the BIOS screen is not fully visible
        if the display supports a maximum resolution of 640 x 480! 
  (BIOS Setup - Menu "Advanced / Peripheral Configuration")

- Added "FORCE USB STICK BOOT" functionality (BIOS Setup - Menu "Boot")  

- Added "Swap LVDS Channel" functionality (BIOS Setup - Menu "Advanced / Peripheral Configuration")

- Fixed wrong PCI IRQ description for PCI, PCIe Slot and onboard LAN (PIC Routing corrected)

- Enabled BIOS-OEM-Area to be flashable with the "bioflash /NOMOD" - option in order to clone BIOS images incl. OEM data (e.g. SMCO data)


====================================================

22.10.2008
BIOS - Change V6.00 Release R1.07.2703.S1

- Support for new Athon TF-20 processor added
  (Update of AGESA code to version 2.08.17)
 
- Bug Fix: LVDS-tool for customizing the LVDS settings
  resulted in incorrect parameters within the Video BIOS
  (LVDS picture in "user defined" LVDS mode may be
  distorted with previous BIOS versions)


====================================================

01.09.2008
BIOS - Change V6.00 Release R1.06.2703.S1

- Bug Fix: Enable BIOS Setup option for "C2/C3" processor
  powerstates only if they are supported by the installed processor

- System Monitoring: Improved Alerting support in case of fan
  failure (requires SystemGuard V3.34 or higher)


====================================================

Note: BIOS R1.05 --> Not released for D23703-S

====================================================


15.05.2008
BIOS - Change V6.00 Release R1.04.2703.S1

- System Monitoring: 
  Temperature parameters for AMD CPU corrected. 
  Note: BIOS R1.03 could result in high processor fan speed,
  and SystemGuard may show critical CPU temperature although
  CPU temperature is still low.
 
- System Monitoring: 
  Add alerting feature for onboard System Monitoring.
  Note: BIOS R1.03 supports Alerting for FAN1 and temperature
  sensors, BIOS R1.04 adds Alerting support for FAN2 and FAN3 

- Bug Fix: Customer OEM Boot Logo was overwritten
  with standard FSC Boot Logo by regular BIOS update.

- Bug Fix: USB 2.0 Hub doesn't work after resume
  from S3.

- Bug Fix: A plugged high speed Multicard reader
  (equipped with 1 CF Card) is reconnected after S3
  and then only as full speed device available in
  Device Manager.

- Improvement: Reduce ACPI S3 BIOS wakeup time.


====================================================


04.04.2008
BIOS - Change V6.00 Release R1.03.2703.S1

- Bug Fix: Despite the fact that the onboard LAN
  controller is disabled in BIOS setup it is possible
  to wake up the system via WOL (wake on LAN).

- Bug Fix: BIOS Setup option "Master Password" of hard
  disk security shows incorrect values.

- Bug Fix: Detection of AMD Sempron and AMD Turion
  CPUs with regard to DMI information.

- Added support for C2 and C3 CPU Power States on
  single core CPUs. Also added a new BIOS Setup option
  to choose individual settings regarding this feature.

- Added C1E support for AMD Multicore CPUs.
  A new BIOS Setup switch to enable/disable this
  feature has been added within "Power" Sub-Menu.
  If set to "Enabled" and all CPU cores are in C1
  power state, enhanced C1 power state is used.
  Set to "Disabled" to avoid problems with Realtime
  Operating Systems.

- Added System Monitoring Alert-Support for Fan 1 and
  temperature sensors.

- Bug Fix: Sporadic error after resume from S3 Power
  State under "Windows VISTA" with 4 GB system memory
  installed.

- Bug Fix: BIOS feature "Wake up Timer" did not work
  after Power Failure.

- Bug Fix: Although Power Failure behaviour had been
  set to "Previous state" in BIOS Setup, the system
  turned on after Power Failure during S4 Power State.

- Bug Fix: Resource conflict of PS/2 keyboard with
  "Windows XP 32 Bit" when there is no PS/2 mouse
  installed.

- Bug Fix: Show correct mainboard hardware revision
  (WGS version) in BIOS Setup <F1> information page.

====================================================



21.02.2008
BIOS - Change V6.00 Release R1.02.2703.S1

- not released version


====================================================


12.02.2008
BIOS - Change V6.00 Release R1.01.2703.S1

- not released version


====================================================


21.12.2007
BIOS - Change V6.00 Release R1.00.2703.S1

- First released version.